Electronics Manufacturing Services
From prototype PCB assembly to flex circuits and wire harness programs, these pages cover the manufacturing services available through YourPCB.
PCB Manufacturing
Fabrication and assembly programs for prototypes, pilot builds, and controlled low-volume production.
Turnkey Electronics Manufacturing
Integrated EMS support covering sourcing, PCB fabrication, assembly, interconnects, testing, and repeat production control.
View service →
Electronic Assembly Services
PCB assembly, harness integration, programming, inspection, and final release control for prototype-to-low-volume electronic builds.
View service →Multi-Board PCBA
Coordinated PCB assembly for products with multiple boards, shared BOMs, connector interfaces, firmware steps, and final test release control.
View service →
Quality Assurance: FAI, 8D, PFMEA
PCB assembly quality assurance support with first article records, 8D corrective action, PFMEA review, traceability, and inspection evidence.
View service →
Conformal Coating for PCB Assembly
Protective PCBA coating support with masking, cleaning review, IPC-CC-830 controls, UV inspection, and post-coat release testing.
View service →
PCB Fabrication Service
DFM-ready bare board fabrication for prototypes, pilot lots, and repeat builds with stackup, finish, inspection, and assembly handoff planning.
View service →Controlled Impedance PCB Manufacturing
Stackup-driven PCB fabrication for 50 ohm, 90 ohm, and 100 ohm controlled-net designs with coupon planning, DFM review, and assembly handoff.
View service →
5G Antenna PCB Manufacturing
RF antenna board fabrication and PCBA support with stackup review, 50 ohm feed planning, material tradeoff checks, and assembly handoff.
View service →
Low Volume PCB Manufacturing
Small-batch fabrication and assembly with DFM review, full testing, and flexible sourcing.
View service →FR-4 PCB Manufacturing
Controlled FR-4 board fabrication with laminate selection, stackup review, DFM checks, electrical test, and assembly-ready release planning.
View service →Single Sided PCB Manufacturing
1 layer PCB fabrication for cost-sensitive electronics with assembly-aware DFM, test planning, and prototype-to-repeat production support.
View service →PCB Assembly Prototype
Rapid-turn prototype assembly for engineering validation and pre-production builds.
View service →Circuit Board Assembly Services
Commercial PCB assembly support covering SMT, through-hole, prototype, and low-volume production with sourcing and test planning.
View service →Custom PCB Assembly
Drawing-controlled PCB assembly for OEM builds that need variant control, mixed sourcing, programming, and product-specific release discipline.
View service →PCB Assembly USA
PCB assembly support for U.S.-based teams that need faster quoting, cleaner DFM feedback, and controlled prototype-to-bridge execution.
View service →
Medical PCB Assembly
Traceable medical PCBA support for prototype, pilot, and controlled low-volume device builds with DFM review, AOI/X-ray planning, and release records.
View service →
IATF 16949 Automotive PCB Manufacturing
Automotive PCB manufacturing support for vehicle electronics programs that need traceability, DFM review, inspection planning, and repeat-lot change control.
View service →Instant PCB Quote
Fast quote-readiness review for PCB fabrication and assembly programs that need pricing, DFM feedback, and cleaner scope definition.
View service →PCB Stencil Service
Laser-cut SMT stencil support with aperture review, paste-printing awareness, and prototype-to-production alignment for PCB assembly programs.
View service →SMD PCB Assembly
Surface mount assembly with support for fine pitch, BGA packages, and X-ray verification.
View service →SMT Assembly with Consigned Components
Buyer-supplied component assembly with kit audits, MSL checks, attrition planning, and hybrid turnkey/consigned BOM control.
View service →BGA Soldering Service
X-ray-verified BGA assembly and recovery support for hidden-joint packages that need stencil control, reflow profiling, and defect-focused process discipline.
View service →PCBA Rework Service
Controlled SMT and PCB assembly recovery with defect triage, solder repair, BGA review, inspection evidence, and repeat-lot process feedback.
View service →Through-Hole PCB Assembly
Wave, selective, and mixed-technology assembly for power, connector, and high-reliability boards.
View service →Flex Circuit Manufacturer
Custom flex and rigid-flex production for compact packaging and bend-critical layouts.
View service →HDI PCB Manufacturer
HDI fabrication support for dense electronics that need microvias, blind and buried vias, sequential lamination, and assembly-aware DFM.
View service →Fast Turn Flex PCB
Quick-turn flex and rigid-flex support for programs that need faster prototypes without skipping bend-zone DFM and assembly planning.
View service →Fast Turn PCB Manufacturing
Quick-turn bare board fabrication for urgent prototypes, NPI builds, and schedule recovery.
View service →4 Layer PCB Manufacturing
4 layer board fabrication and assembly support with controlled stackups, cleaner plane strategy, and prototype-to-production continuity.
View service →8 Layer PCB Manufacturing
Dense multilayer PCB fabrication and assembly support with stackup review, impedance planning, BGA-aware DFM, and inspection evidence.
View service →4 Oz Copper PCB Fabrication
Heavy copper PCB fabrication for power electronics, charging, and industrial boards that need 4 oz copper with manufacturable geometry and assembly-aware DFM.
View service →Custom Circuit Board Service
Spec-driven PCB manufacturing for OEM teams that need custom stackups, copper weights, finishes, mechanical features, and assembly-aware release review.
View service →
Castellated Hole PCB Modules
Plated half-hole PCB module manufacturing with edge-pad DFM, host-board footprint review, SMT handoff, and first-article inspection planning.
View service →Gold Finger PCB Manufacturing
Card-edge PCB manufacturing with gold finger finish review, bevel clearance checks, connector fit planning, and inspection-ready release notes.
View service →Wire Harness and Interconnect
Harness production, legacy connector support, and specialty cable assembly services for system integration.
Wire Harness Contract Manufacturing
End-to-end harness production with testing, traceability, and support for high-mix programs.
View service →
Connector Crimping and Soldering Services
Termination-focused cable and harness assembly with crimp-process control, soldered connector review, cavity-map verification, and electrical test release.
View service →Bespoke Cable Manufacturers
Custom cable manufacturing for OEM programs that need drawing-controlled assemblies, shielding, labeling, and documented test coverage.
View service →High Voltage Cable Manufacturer
High voltage cable assemblies for EV, battery, charger, inverter, and industrial power programs that need insulation-system control and documented...
View service →Low Volume Wire Harness Assembly
Quick-turn custom harness builds for prototypes, pilot lots, and engineering changes.
View service →Power Tool Wire Harness
Internal harness manufacturing for corded tools, battery tools, chargers, and accessory assemblies that need routing control, strain relief, switch...
View service →Auto Electrical Wiring Harness Manufacturers
Automotive harness manufacturing for prototype, pilot, service-part, and specialty vehicle programs with traceability and end-of-line testing.
View service →Automotive Wire Harness Clips
Clip-ready vehicle harness assembly with routing retainers, branch protection, and service-part control aligned to the install path.
View service →Last Mile Delivery Vehicle Wiring Harness
Fleet and delivery-van harness manufacturing for telematics, cargo lighting, refrigerated routes, retrofit programs, and service-part support.
View service →Obsolete Connector Replacement
Reverse-engineering and replacement support for discontinued interconnect systems.
View service →Deutsch Connector Assembly
Sealed connector cable and harness assembly for OEM programs that need cavity control, wedgelock verification, and harsh-environment release discipline.
View service →Molex Connector Wire Harness Assembly
Molex-based wire harness and cable assembly for OEM programs that need connector-family control, cavity-map accuracy, and documented electrical testing.
View service →Fiber Optic Cable Assembly
Specialized cable assembly support for optical interconnect and precision termination work.
View service →Robotic Cable Assemblies
Motion-rated cable assembly for robots, cobots, servo systems, and automated equipment that need flex-life control, shielding discipline, and documented...
View service →Need a Quote or Design Review?
If you already have files, drawings, or a BOM, send them early. Manufacturing feedback before release is cheaper than rework after the first build.
Contact YourPCB