Skip to content
← Back to Blog

Testing

5 articles in this category

Micro-Coax Test Fixture Readiness: Avoid Cable Assembly Certificate Delays

Use this buyer checklist to prevent micro-coax cable assembly shipments from stalling when internal test fixtures, certificates, and release evidence are not ready.

By Hommer Zhao
ICT vs Functional Test in PCB Assembly: What Buyers Miss

ICT and functional test catch different PCB assembly failures. Learn when each test pays for itself and how to specify test coverage.

By Hommer Zhao
Crimp Pull Testing in Wire Harness Assembly: What Buyers Should Specify Before Release

Crimp pull testing is one of the fastest ways to check whether a wire-to-terminal termination has real mechanical margin or only looks acceptable. This guide explains what pull testing proves, what it does not prove, and what buyers should define before approving a wire harness build.

By Hommer Zhao
Wire Harness Electrical Testing: Continuity, Insulation Resistance, and Hipot Requirements Buyers Should Define Before Release

Continuity-only testing is not enough for many wire harness and cable assembly programs. This guide explains what continuity, insulation resistance, and hipot testing each prove, what buyers should specify in the RFQ, and what records a supplier should retain before release.

By Hommer Zhao
Burn-In Testing in Electronics Manufacturing: When Buyers Should Ask for It and What It Actually Proves

Burn-in testing can be a useful screen for early-life failures in PCB assembly and box build work, but only when the load, temperature, duration, and records are clearly defined. This guide explains when buyers should ask for burn-in, what it can actually prove, and when other test methods are more effective.

By Hommer Zhao